Manley Stingray II Bedienungsanleitung

Display Menu FunctionsThe Display Menu is the second of the two Menus on the Stingray II. To access the Display Menu, press both the Input Selection a

OPTIMIZING YOUR SOUND SYSTEM This section is full of little hints that may help you get the most out of your stereo - and it may not cost anything

You may have bought a great system but there is a good chance that you are only getting a fraction of its po-tential. Very frequently we have exper

TUBE F.A.Q.A few general all-too-frequently-asked vacuum tube questions from the manleylabs.com F.A.Q. as found on our website are answered here in ca

FAQ #16g. But it sounds different when you rst turn it back on. What is the warm-up time for this gear? We generally recommend 45 minutes warm-up tim

What do I do? The amp should be well warmed up (30 min.) and no music playing. Set the meter to read DC volts. The meter has two test leads, red and b

REMOTE CONTROLYour Stingray II is equipped with a Remote Control that communicates with the amplier via RF (radio frequency) and/or IR (infrared) sig

TROUBLESHOOTINGIt is rare that any of these problems occur, but here are some things to try if something is “wrong”:HUM - Try a mains ground adapter i

CREDITS An EveAnna Manley ProductionDirected by: Humberto RodriguezMastered by: Baltazar HernandezTitled by: J. Gordon HoltFancy Lights/Coding/Anti-Sp

SPECIFICATIONS- 3 x RCA Line Inputs, 1 x 1/8” Line Input (front panel)- TRIODE - UL Switching- RECORDING OUT - SUBWOOFER OUT- TAPE LOOP (Insert) with

CONTENTSINTRODUCTION...3MAINS CONNE

FCC INSTRUCTION TO THE USERThis equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the

INTRODUCTIONTHANK YOU!…for choosing the Manley Stingray II integrated amplier for your loudspeaker driving requirements. You possibly chose this prod

MAINS CONNECTIONS Your STINGRAY II has been factory set to the correct mains voltage for your country. The voltage setting is marked on the serial ba

Connecting Your Stingray IISetting up this integrated amplier is rather easy. Please refer to pages 8 & 9 for pictures of the back and sides of t

8. To select one of the RCA inputs on the back of the unit or the 1/8” input on the Left-Front, use the Input Selec-tion knob on the left side of the

INPUTS, OUTPUTS, &THE STUFF ON THE SIDESINPUTS: Any of the three sets of stereo INPUT jacks can be used with any unbalanced RCA audio analog outpu

LOOP RETURN: This input comes in after the Input Selector and just before the Stingray II’s Balance and Volume controls. If you have all your sources

DETAILED FRONT PANEL FUNCTIONSINPUT SELECTION KNOB: This knob, located on the left side of the faceplate, controls several functions. Upon startup, i